Rod Splice

Iron Rod Splice

We can ship rods up to 118" in one piece with standard shipping service. For rods longer than 118" we recommend splicing. If you require a one piece rod longer than 118" please call for a freight quote.

Specify overall rod length and indicate location of splice if other than center. A bracket must be used at each splice point for support.

Splice location

French rod

For French rods, check this box, and remember to add desired returns to your design.

Face width

Enter face width measurement in inches, using only numbers and optional decimal point. All rods will be cut exactly to the width you specify. There is no minimum charge.

Rod length

Enter rod length in inches, using only numbers and optional decimal point. All rods will be cut exactly to the length you specify. There is no minimum charge.

Finish

Maximum unspliced rod length: "

Note: Plated finishes work best with smooth surfaces. Highly contoured surfaces will show contrast when plated.

Clear coat

This is a "living finish"; it is not lacquered and will naturally darken and develop a lustrous patina over time. An optional clear coat may be specified below to maintain a bright look. A 12% surcharge will apply ($300 minimum).

Category: